Treated Distillate Aromatic is type of rubber process oil

Treated distillate aromatic extracts (TDAE) is a rubber processing oil with high aromatic content. It is used rubber softening additive in the process of vulcanization of rubber. Its high viscosity-gravity constant has made it highly preferable in the tire manufacturing applications, thereby, reducing heat buildup. Due to this characteristic of treated distillate aromatic extracts, it is possible to produce large rubber based intermediate products. TDAE is a green rubber oil (natural friendly oil) with a high aromatic content, environmental protection, non-toxic, non-carcinogenic characteristics, can be used as a substitute for existing aromatic oil. This environment friendly process oil is used as a softening additive in the process of vulcanization of natural rubber and as a component of rubber compounds. Its high viscosity gravity constant (vgc) leads to the reduction in heat buildup and rotational resistance during the usage of tyres. Such characteristics enable our TDAE to be used in the production of high quality tire and rubbers. We manufacture and offer Specialty Rubber Process Oils meeting European Regulation for non carcinogenic oils. We have a wide range of Mild Extracted Solvent (MES), Residual Aromatic Extracted Solvent (RAE) and Treated Distillate Aromatic Extracted Solvent (TDAE).

Applications

Rubber process oil is used in industry ink formulations, isolation manufacturers , atoumobile tire making factory , rubber manufacturing , shoes , flooring , cable and any other industrial interface

  • industry ink formulations
  • isolation manufacturers
  • automobile tire making factory
  • rubber manufacturing
  • shoes
  • flooring
  • cables and any other industrial interface
  • as an ingredient (softener/plasticizer)
  • as a processing aid in the production of natural and synthetic rubber products.
  • as an ingredient in certain engine, gear and lubricating oils.

Packing of TDAE

Rubber process oil is packed in new 180 kg drums , iso tank , flexi tanks and bulk shipments. Each 20 foot container takes 80 drum TDAE. 

Guaranty/warranty of TDAE

Panaroma Global Trade Sdn Bhd  guaranty the quality of TDAE with arrangement of international inspector to check quality and quantity of TDAE during the loading to vessel and controlling the production by qc by batch test report before shipping. Our Clients may always check every details about their shipping process from sending stage till receiving  .

TDAE analyses

Test

Test method

Unit

Result

Sp.gr @ 15˚C

ASTM D-1298

kg/m3

953

Flash point

ASTM D-1298

Kg/m3

246

Congealing point

ASTM D-92

C

246

Congealing Point

ASTM D-938

C

33

TAN

ASTM D-974

CSt

0.12

K.Vis @ 40˚C

ASTM D-445

CSt

549.48

K.Vis @ 50˚C

ASTM D-445

CSt

260.8

K.Vis @ 100˚C

ASTM D-1218

19.65

RI@20˚C

ASTM D-1218

1.5227

RI@67˚C

ASTM D-2501

1.5113

VGC

ASTM D-2501

0.895

Aniline point

ASTM D-611

C

63

Refractivity intercept

AMS140.13

1.051

Water content (Karl fischer)

ASTM D-2622

Ppm

412.2

Sulphur content

Astm D-2622

%(W/W)

3 Max

Carbon type distribution

AMS 140.13

% CA/CN/CP

23/39/38

Content of PCA extract

Ip 346

%(W/W)

2.2

Specification of TDAE

Characteristic

Unit

Result

Test method

Sp.gr @ 15˚C

Kg/m3

953

ASTM D-1298

Flash point

C

246

ASTM D-92

Congealing point

C

33

ASTM D-938

Tan

Mg koh/gr

0.12

ASTM D-938

Kinematic visocisty@40C

cSt

549.48

ASTM D-445

Kinematic visocisty@50C

cSt

260.8

ASTM D-445

Kinematic visocisty@100C

cSt

19.65

ASTM D-445

RI@20C

1.5227

ASTM D-1218

RI@67C

1.5113

ASTM D-1218

VGC

0.895

ASTM D-2501

Aniline point

C

63

ASTM D-611

Refractivity intercept

1.051

AMS140.13

Water content (Karl fischer)

ppm

412.2

ASTM D-6304

Sulphur content

%(W/W)

3 max

ASTM D-26.22

Carbon type distribution

% CA/CN/CP

23/39/38

AMS 140.13

Content of PCA extract

%(W/W)

2.2

Ip 346

×

Table of Contents